Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge

"This RS-232 to RS-232 isolator by Delock is designed to protect the connected components from electrostatic discharges and power surge. In addition, the galvanic isolation avoids data transmission errors by uneven ground voltages. Power can be provided through the serial interface or the included power supply. DIN rail mounting is supported. Specifikace Connector: Host: 1 x D-Sub 9 pin Serial RS-232 female Device: 1 x D-Sub 9 pin Serial RS-232 male 1 x DC 1.3 x 3.5 mm female Data transfer rate up to 1 Mbps Data Bit: 5, 6, 7, 8 Stopp Bit: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Signals: TXD, RXD, CTS, RTS, DCD, DSR, DTR LED indicators for status TX / RX and power supply Galvanic isolation 3 kV (optical isolation) 600 W power surge for the RS-232 interfaces 600 W power surge at the DC Connector ± 15 kV ESD protection for all signal pins Power supply RS-232 interface pin 9: 12 V (optional) Power supply: 10 - 30 V Power consumption: ca. 50 mA Operating temperature: - 30 °C ~ 75 °C Relative humidity: 5 ~ 95 % (not condensing) Storage temperature: - 40 °C ~ 85 °C Housing material: plastic Dimensions (LxWxH): ca. 88 x 54 x 22 mm Accessories for mounting on 35 mm DIN rails Specifikace napájecího zdroje Wall power supply Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.48 A Output: 12 V / 1.6 A Ground outside, plus inside Dimensions: inside: o ca. 1.3 mm outside: o ca. 3.5 mm length: ca. 9.5 mm Systémové požadavky Devices with RS-232 interfaces Obsah balení Converter Power supply Mounting set for DIN rail User manual Balení • Krabice"